1FZ-FE Basic Turbo Kit
1FZ-FE Basic Turbo Kit HDA-FZTB-5 1FZ-FE Basic Turbo Kit 1FZ-FE Turbo 875CC Fuel Injector Kit 1FZ-FE Turbo Kit Internally Gated 1FZ-FE Turbo Kit Internally Gated IMG_3357 IMG_3353

1FZ-FE Turbo Kit Internally Gated

$4,800.00$5,468.89

This is our 1FZ-FE Turbo Kit in a 80 or 105 Series Landcruiser. It comes with a turbocharger, J-pipe Style Manifold, all oil & water feed and drain lines, genuine gasket set, Walbro Fuel Pump, Raceworks 980cc Injectors and direct fit connectors, ARP Head Studs, Direct Fit Turbosmart Fuel Pressure Regulator and A Set Of Genuine Exhaust Manifold Studs & Nuts.

Optional Turbo Beanie, Intercooler And 3″ Stainless Dump Pipe

  • Worldwide Shipping
Guaranteed Safe Checkout

1FZ-FE TURBO KIT (INTERNALLY GATED)

What’s included in this kit?

  • ARP 1FZ-FE Head Studs (203-4205)
  • 6 X 980cc Modified/High Flowed Bosch Injectors – INJ-505-11MM (DIRECT FIT)
  • 6 x CPS-112 Denso Injector Harness (DIRECTLY PLUG INJECTORS INTO EXISTING ENGINE LOOM)
  • Walbro 460 LPH Fuel Pump F90000267 (WILL FIT INTO FACTORY FUEL PUMP LOCATION WITH MINOR MODIFICATION)
  • 1FZ-FE Turbosmart Fuel Pressure Regulator Kit (FUEL PRESSURE REGULATOR WITH ADAPTERS TO FIT FACTORY FUEL RAIL)
  • 13 X Genuine Toyota Exhaust Manifold Nuts & Studs Kit
  • Genuine Toyota MLS Exhaust Manifold Gasket
  • Genuine Toyota Exhaust Manifold Sealing Rings
  • Turbocharger Oil Drain with Steel and Aluminium AN10 Weld On Fitting
  • New Lower Exhaust Manifold Studs & Nuts
  • PULSAR Next GEN GTX3582 XR6 Style Internally Waste-gated Turbocharger with 5PSI Wastegate
  • Stainless Steel XR6 5 Bolt to 3″ V-Band Dump Pipe with Clamp and Flange
  • Australian Made Stainless Turbocharger Oil and Water Feed Lines
  • 1/8 T-Piece for Factory Oil Sender and Oil Feed
  • HD J-Pipe Style Turbocharger Manifold With Nuts and Studs Fitted (RETAINS FACTORY HEADERS)
  • T3 Turbocharger Inlet Gasket
  • All required Hose Clamps
  • All fitting Hardware
  • J-Pipe Fitting guide
  • Raceworks Extreme Duty Turbo Beanie RWM-046 ( OPTIONAL )
  • COOLING PRO 600 X 300 X 75 – 2.5″ Outlet Bar & Plate Intercooler ( OPTIONAL )
  • 3 Inch Stainless TIG Welded V-Band Dump Pipe with Oxygen Sensor Bung ( OPTIONAL )

Other Items You May Need!

There are a few other items you may need to get the most out of your turbo petrol build! We can supply things like:

  • Intercoolers
  • All Haltech Gear
  • NPC Clutches
  • Additional Fuel Pumps
  • All Raceworks Products
  • And Much More!

If it’s not listed on our website, feel free to contact our shop and we can organise any additional items you may require.

Turbocharger Information

  • New Aerodynamic 10 blade billet compressor wheel flow more air over the stock cast or Gen1 11 blade billet wheel.
    New Aerodynamic 9 blade turbine wheel, less weight, lower inertia, and higher flowability.
    Genuine structure and rebuildable dual ceramic ball bearing system.
    Larger 0.72A/R compressor cover with Anti-Surge 4″ inlet.
    Billet actuator with black anodized coating.

Manifold Information

  • Australian designed & hand-crafted in Brisbane, QLD
  • Fully TIG welded
  • High mounted position to show off your brand new HD Auto turbo kit, and keep it away from elements when off-road

F.A.Q

Q: Will I need engine management for my vehicle?

A: This kit contains most items needed to correctly turbocharge a 1FZ-FE. An engine management system such as a Haltech ECU is highly recommended for running and tuning your engine safely.

Q: What PSI wastegate does it run?

A: It runs a 5 PSI waste gate. To increase the boost pressure, you will have to fit a Boost Controller.

Q: Do I need to run water lines to the turbo?

A: YES. They are water cooled and must have the water lines hooked up. Failing to do so will void all warranty and significantly reduce the service life of your turbocharger.

Q: My vehicle has aftermarket extractors on it. Will I be able to fit this kit to it?

A: The HD J-pipe is designed to bolt to the factory exhaust manifold/headers on a 1FZ-FE. In order to fit this kit you must use the factory headers or source them if you no not have them.

Note: At times there can be a backorder of this product. We ensure to get every kit out in an extremely timely manner however do occasionally face delays of up to 2 weeks. If you are concerned or have a deadline, please contact us to confirm stock prior to ordering. 

Additional information

Weight 22 kg
Dimensions 30 × 40 × 40 cm

Brand

HDAutomotive

Reviews

There are no reviews yet.

Be the first to review “1FZ-FE Turbo Kit Internally Gated”

Your email address will not be published. Required fields are marked *