Haltech Bosch 145 PSI Fluid Pressure and Temperature Sensor

Haltech Bosch 145 PSI Fluid Pressure and Temperature Sensor

The Haltech Bosch fluid pressure and temperature sensor (part number HT-010920) reads pressure and temperature from one sensor, so one port gives your Haltech ECU or dash two channels. It reads 0 to 145 PSI and -40 to 140°C, and suits diesel, petrol, E85, engine oil and transmission oil.

Please note: Haltech don’t recommend this sensor for water or coolant, which cavitate far more easily than the fluids above. Keep pressure spikes in the system below the sensor’s 20 bar (2000 kPa) maximum.

🚗 Suitable for:

• Engine oil pressure and temperature
• Fuel pressure and temperature, including diesel, petrol and E85
• Transmission oil pressure and temperature
• Haltech ECUs and dashes with spare analog inputs

📦 What’s Included:

• 1x Bosch 145 PSI fluid pressure and temperature sensor
• Matching plug and pins
• 1x M10 x 1.0 to 1/8 NPT adaptor

🔧 Technical Specifications:

• Pressure range: 0 to 145 PSI
• Temperature range: -40 to 140°C
• Thread: M10 x 1.0, with the 1/8 NPT adaptor supplied
• Maximum overpressure: 20 bar (2000 kPa)
• Installation torque: 37.5 ± 2.5 Nm
• Supply voltage: 5.0 ± 0.25 V
• Mounting: orifice pointing down, 0 to 45° from vertical

⚙️ Why Choose Haltech:

• Genuine Bosch sensor, supplied by Haltech with the plug, pins and adaptor
• Pressure and temperature from a single port, which saves drilling or tapping a second one

❓ FAQs:

Q: Will it screw into my Toyota or Nissan block?
A: Most Toyota and Nissan blocks use BSPT threads, and the supplied adaptor is 1/8 NPT. You’ll need a 1/8 BSPT male to 1/8 NPT female adapter to fit it to the block, such as our Raceworks RWF-370-02-02BK.

Q: Can I use it for coolant temperature?
A: No. Haltech don’t recommend it for water or coolant. Use a Haltech coolant temp sensor instead, such as the M12 x 1.5 HT-010300.