1HD-FTE Upper EGR Blank Plate
Stainless steel EGR blanking plate. Suitable for 1HD-FTE engines fitted with an EGR system from factory.
This blanking plate is designed to go on the top side of the EGR pipe where it bolts to the intake/cross-over pipe. It is a slip-in design which means you don’t have to completely remove the pipe to fit, you can simply loosen the two nuts, push the EGR pipe back, slip the plate in and bolt it back up!
The manifold side EGR plate can also be purchased from the drop down list. This will allow the EGR pipe to be completely removed as both sides are blocked off.
This EGR blanking plate has been laser cut from 3mm stainless steel to ensure a perfect fit and finish. It can be fit with the EGR pipe still in place, or can be used by itself if if the EGR pipe is to be removed completely.
As with any emissions system modification, check with local laws and regulations before fitting this plate to your vehicle.
Designed and manufactured in Brisbane, Australia to fit:
HDJ100
HDJ79
HDJ78
Reviews
There are no reviews yet.