Front CV Shaft suitable for Nissan Navara NP300 D23 2021 On

Front CV Shaft suitable for Nissan Navara NP300 D23 2021 On

Front CV drive shaft suitable for the Nissan Navara NP300 D23 4WD from the 12/2020 facelift, 32 spline outer. Complete shaft with both joints and boots fitted, sold each, fits either side. New, not a reconditioned exchange.

A click on full lock under power is the outer joint. A vibration under load in 4WD is the inner. Once a boot has split and let the grease out the joint is on borrowed time. Fit a new shaft, torque the axle nut to spec and check the diff side seal while it is out. The 2015 to 2020 shaft is 29 spline, listed separately.

🚗 Suitable for:

• Nissan Navara NP300 D23 4WD, 12/2020 on (facelift, 32 spline hub)

📦 What’s Included:

• 1x front CV drive shaft, 32 spline, both joints and boots fitted

🔧 Fitment Details:

• Front, fits either side
• 12/2020 on 4WD, 32 spline. The 2015 to 2020 ute takes our 29 spline shaft
• Standard height. For a lifted ute ask us about the extended shaft
• Torque the axle nut to the factory figure

⚙️ Why Choose This Part:

• New shaft, no exchange or core charge
• Both joints greased and booted

📦 Dispatch Information:

• Contact us for current stock and lead times.

❓ FAQs:

Q: 29 or 32 spline?
A: Build date. 05/2015 to 12/2020 is 29, 12/2020 on is 32. Send your VIN if you are not sure.

Q: Lifted ute?
A: Standard length suits up to about 2 inches. Past that ask us about the extended shaft.

Q: Not sure it suits your Navara?
A: Send us your VIN and we’ll check it before you order.