Front Left Upper Control Arm suitable for Toyota Hilux N80 GUN126 and Fortuner

Front Left Upper Control Arm suitable for Toyota Hilux N80 GUN126 and Fortuner

Selby BJ8842L-ARM front left upper control arm (passenger side) suitable for the Toyota Hilux N80 GUN126, GUN125 and GGN125 4WD from 2015 and the Fortuner GUN156. Complete arm with the ball joint and both bushes pressed in, so it bolts straight on.

The upper ball joints on the N80 wear early on a lifted or loaded ute, and the bushes go not long after. A complete arm costs little more than a ball joint and a bush kit and saves pressing anything. Torque the pivot bolts with the suspension loaded and get an alignment after. We sell the right side on its own and the pair.

🚗 Suitable for:

• Toyota Hilux N80 GUN126 2.8 litre 1GD-FTV 4WD, 2015 on (SR, SR5, Workmate, Rugged, Rugged X)
• Toyota Hilux N80 GUN125 2.4 litre 2GD-FTV 4WD, 2015 on
• Toyota Hilux N80 GGN125 4.0 litre 1GR-FE 4WD, 2015 on
• Toyota Fortuner GUN156 2.8 litre 1GD-FTV, 2015 on

📦 What’s Included:

• 1x Selby BJ8842L-ARM front left upper control arm with ball joint and bushes
• Castle nut, split pin and grease nipple

🔧 Fitment Details:

• Front left (passenger side)
• Standard height arm. Suits a stock ute or up to a 2 inch lift. For more lift ask us about our high angle arms
• Torque the pivot bolts with the wheels on the ground
• Wheel alignment after fitting

⚙️ Why Choose Selby:

• Ball joint and bushes fitted, no pressing
• Sealed ball joint with a grease nipple
• Australian brand with a fitment catalogue we check against

📦 Dispatch Information:

• Contact us for current stock and lead times.

❓ FAQs:

Q: Will it fix my camber after a lift?
A: No. It is the standard geometry arm. Our high angle upper arms are the ones for a 2 inch plus lift.

Q: One or both?
A: If one ball joint is gone the other is close. Do the pair.

Q: Not sure it suits your vehicle?
A: Send us your VIN and we’ll check it before you order.