N70 Pillar Pod Raceworks Gauges Combo suitable for Toyota Hilux
Twin 52mm pillar pod for the Toyota Hilux N70, with a Raceworks electronic boost gauge and a Raceworks electronic EGT gauge fitted. The pod mounts on the A-pillar and comes painted grey to suit the factory interior. It fits airbag and non-airbag models from 2005 to 2015.
The boost gauge reads 0 to 60 PSI in 10 PSI increments. The EGT gauge reads 200 to 1200 degrees Celsius. Both have an analogue face with electronic sensors, so no fluid or pressure lines run into the cabin.
🚗 Suitable for:
- Toyota Hilux N70 KUN26 1KD-FTV 3.0 and KUN25 2KD-FTV 2.5 turbo diesel, 2005 to 20152005 to 2015
- Airbag and non-airbag models
- Automatic and manual
- 12V vehicles only
📦 What’s Included:
- 1 x twin gauge pillar pod, painted grey, two 52mm gauge holes
- 1 x Raceworks 52mm electronic diesel boost gauge kit (VPR-309), 0 to 60 PSI, with pressure sensor and wiring harness
- 1 x Raceworks 52mm electronic EGT gauge kit (VPR-302), 200 to 1200 degrees Celsius, with EGT probe and wiring harness
🔧 Fitment Details:
- Best fit is over the factory pillar trim. The pod can replace the factory trim if you prefer.
- Daisy chain wiring: power, ground and illumination connect to one gauge, and a piggyback cable runs between the two gauges.
- All Raceworks gauges are for 12V applications only.
⚙️ Why Choose Raceworks:
- Analogue face with electronic sensors, so nothing wet comes into the cabin.
- Motorsport functions on a single button on the face: gauge sweep and opening ceremony over 270 degrees, programmable warning.
- All settings are hard-coded into memory, so they survive a flat battery.
- Ten backlight colours: red, green, blue, yellow, purple, teal, cool white, pink, warm white and orange.
📦 Dispatch Information:
In stock in Brisbane. Order before midday for same-day dispatch.
❓ FAQs:
Q: Does the pod fit a Hilux with curtain airbags?
A: Yes. It suits both airbag and non-airbag N70 models from 2005 to 2015.
Q: Do I have to run a boost hose into the cabin?
A: No. Both gauges use electronic sensors in the engine bay and only wiring comes through the firewall.
Q: Can I run these gauges on a 24V vehicle?
A: No. Raceworks gauges are 12V only.













There are no reviews yet.