Universal Joint suitable for Toyota LandCruiser 70 80 100 105 200 Series and Hilux

Universal Joint suitable for Toyota LandCruiser 70 80 100 105 200 Series and Hilux

RUJ-2041-TOYO greasable universal joint suitable for the front and rear tailshafts on the Toyota LandCruiser 40, 60, 70, 80, 100, 105 and 200 Series, the V8 70 Series and the 2015 on Hilux GUN125 and GUN126. It has 32mm caps, 64mm across the ring grooves, internal snap rings and a grease nipple.

A worn uni shows up as a clunk when you take up drive, a vibration that comes in at speed and goes with the throttle, or rust dust around the caps. Each tailshaft has two universal joints, so order two per shaft. An 80 Series with front and rear shafts takes four.

Supplied with the grease nipple and four circlips. Grease it on fitting and at every service.

🚗 Suitable for:

• Toyota LandCruiser 70 Series HZJ70, HZJ73, HZJ75, FZJ75, HZJ78, HZJ79, FZJ78, FZJ79, HDJ78 and HDJ79, 1990 to 2007
• Toyota LandCruiser 70 Series VDJ76, VDJ78 and VDJ79 1VD-FTV, 2007 on
• Toyota LandCruiser 80 Series FJ80, FZJ80, HZJ80, HDJ80 and HDJ81, 1990 to 1998
• Toyota LandCruiser 100 and 105 Series HZJ105, FZJ105, HDJ100, HDJ101 and UZJ100, 1998 to 2007
• Toyota LandCruiser 200 Series UZJ200 and VDJ200, 2007 on
• Toyota LandCruiser 40 and 60 Series BJ, FJ and HJ, 1974 to 1990
• Toyota Hilux GUN125 and GUN126, 2015 on
• Toyota LandCruiser Prado KZJ71 and KZJ78, 1993 to 1996

📦 What’s Included:

• 1x RUJ-2041-TOYO universal joint
• 1x grease nipple
• 4x circlips

🔧 Fitment Details:

• 32mm cap diameter, 64mm across the ring grooves
• Internal snap rings
• Greasable
• Two per tailshaft. Four to do an 80 Series front and rear
• Check the cap size against your old joint before you order

⚙️ Why Choose This Part:

• Sealed needle rollers with a grease path to each cap
• Heat treated cross and caps

📦 Dispatch Information:

• Contact us for current stock and lead times.

❓ FAQs:

Q: How many do I need?
A: Two per tailshaft. A LandCruiser with a front and rear shaft takes four.

Q: Is the grease nipple in the cross or the cap?
A: This joint takes its grease nipple in the cross. Measure your old joint: 32mm caps and 64mm across the grooves is this one.

Q: Not sure it suits your vehicle?
A: Send us your VIN and we’ll check it before you order.