Proudly fitted to your favourite vehicles. As seen on, 

1FZ-FE TURBOCHARGER KIT (EXTERNALLY GATED)

This 1FZ-FE Turbocharger kit is perfect for those wanting to push big power out of their 1FZ Landcruiser.

What’s included in this kit?

• ARP 1FZ-FE Head Studs (203-4205)
• 6 X 980cc Modified/High Flowed Bosch Injectors – INJ-505-11MM (DIRECT FIT)
• 6 x CPS-112 Denso Injector Harness (DIRECTLY PLUG INJECTORS INTO EXISTING ENGINE LOOM)
• Walbro 460 LPH Fuel Pump F90000267 (WILL FIT INTO FACTORY FUEL PUMP LOCATION WITH MINOR MODIFICATION)
• 1FZ-FE Turbosmart Fuel Pressure Regulator Kit (FUEL PRESSURE REGULATOR WITH ADAPTERS TO FIT FACTORY FUEL RAIL)
• 13 X Genuine Toyota Exhaust Manifold Nuts & Studs Kit
• Genuine Toyota MLS Exhaust Manifold Gasket
• Stainless Flexible Turbocharger Oil Drain with Aluminium AN10 Weld On Fitting AND Fitting That Can Be Tapped Into Upper Sump
• PULSAR Next GEN GTX3582 Turbocharger – T3 Inlet, 3″ V band Outlet, 1.06 Rear
• Turbosmart Gen V 50mm External Pro-gate
• Stainless Steel 3″ V-Band (for turbocharger outlet)
• Australian Made Stainless Turbocharger Oil and Water Feed Lines
• 1/8 T-Piece for Factory Oil Sender and Oil Feed
• 6Boost T3 Open Port Manifold with 50mm Gate Port  (available in other options)
• T3 Turbocharger Inlet Gasket
• All required Hose Clamps
• All fitting Hardware
• Raceworks Extreme Duty Turbo Beanie RWM-047
• COOLING PRO 600 X 300 X 75 – 2.5″ Outlet Bar & Plate Intercooler ( OPTIONAL )

Other Items You May Need!

There are a few other items you may need to get the most out of your turbo petrol build! We can supply things like:

• Intercoolers
• All Haltech Gear
• NPC Clutches
• Additional Fuel Pumps
• All Raceworks Products
• And Much More!

If it’s not listed on our website, feel free to contact our shop and we can organise any additional items you may require.

Turbocharger Information

• New Aerodynamic 10 blade billet compressor wheel flow more air over the stock cast or Gen1 11 blade billet wheel.
• New Aerodynamic 9 blade turbine wheel, less weight, lower inertia, and higher flowability.
• Genuine structure and rebuildable dual ceramic ball bearing system.
• Larger 0.72A/R compressor cover with Anti-Surge 4″ inlet.
• T3 Inlet, 3″ V band outlet

Manifold Information

• 6Boost Performance Spaghetti Style Manifold
• Fully TIG welded
• High mounted position to show off your brand new HD Auto turbo kit, and keep it away from elements when off-road

F.A.Q

Q: Will I need engine management for my vehicle?

A: This kit contains most items needed to correctly turbocharge a 1FZ-FE. An engine management system such as a Haltech ECU is highly recommended for running and tuning your engine safely.

Q: What PSI External wastegate does it run?

A: It runs a 14 PSI waste gate. To change the boost pressure, you will have to change the springs in the gate.

Q: Do I need to run water lines to the turbo?

A: YES. They are water cooled and must have the water lines hooked up. Failing to do so will void all warranty and significantly reduce the service life of your turbocharger.

Note: At times there can be a backorder of this product. We ensure to get every kit out in an extremely timely manner however do occasionally face delays of up to 2 weeks. If you are concerned or have a deadline, please contact us to confirm stock prior to ordering.