Built 400HP Engine Package Suitable for Landcruiser 1HD-FTE

Built 400HP Engine Package Suitable for Landcruiser 1HD-FTE

🚗 Suitable for:

• Toyota Landcruiser HDJ79 1HD-FTE
• Toyota Landcruiser HDJ100 1HD-FTE
• Vehicles with an existing 1HD-FTE engine conversion

✨ Built Long Engine

Toyota’s greatest gift to the diesel world, the 1HD-FTE 24 valve direct injection electronically controlled engine is revered by Toyota enthusiasts for it’s reliability off road, As well as it’s potential to be modified for greatly increased horsepower without breaking a sweat.

The limit of the factory engine is an already impressive 350HP, over that it is at risk of bending rods. Showcasing what can be achieved using parts from our best suppliers – This brand new engine has been upgraded by HD Auto with significantly stronger Billet rods and ARP Head studs – to suit those wanting to achieve 400+HP and 1000+NM Torque from Their 1HD-FTE Engine.

✅ Ready to drop in
A brand new engine is an easy way to replace your Tired 1HD-FTE. Drop in to replace your existing setup or use for a fresh engine conversion.

🌀 UFI Turbocharger

If you are seeking big horsepower you cannot go past the UFI 23L. When paired with a set of 350-400HP fuel injectors, this turbo can flow enough air to keep the AFR clean, and provide more than enough response to daily drive while having HUNDREDS of horsepower and 1000+NM of torque available at the right foot.

💥 High Flow Injector Options: Available with multiple horsepower options to suit transmission and driveline:

• • 220HP (Stock Injector size)
  • 270HP (Custom injectors to suit A750 Automatic Transmission)
  • 250HP-330HP –  (also referred to as +30 injectors)
  • 350HP-400HP –  (also referred to as +70 injectors)

💥 Fuel System
Fitted with a brand new Electronic injector pump, High Flow injectors and injector lines. We recommend the electronic injection system over a mechanical conversion – The high pressure system offers more accurate tuning and the highest possible Horsepower result with less soot.

⚡ Tuning
The 1HD-FTE can be tuned by using a Unichip Module; HD Auto can supply pre-tuned Unichip modules to suit all of our performance packages.
We have the ability to offer multi map tuning, with hard cut rev limiter and lumpy idle programmed onto certain tunes.

Typical 5 Map Tuning options – 1. Power 2. Tow 3. Economy 4. 4×4 5. Hard Cut / Lumpy Idle

🛠️ Conversion
Don’t already have an FTE powered vehicle & looking at a conversion?
This engine package is not a complete conversion – There are a number of components that need to be sourced to complete a 1HD-FTE conversion from scratch;

-Intake manifold, accessory Pumps & Bolt on accessories for the engine.
-ECU / EDU (Engine Control Unit and Spill Driver)
-Conversion Wiring Loom to suit.
-Sump to suit your chosen vehicle.
-Engine Mounts and brackets to suit your vehicle.
-12MM Fuel feed line is required for the FTE, many vehicles have factory 10mm diameter which is inadequate.
-1HD-FTE Accelerator pedal (Electronic uses a Drive-by-wire, not a throttle cable)