Garrett Turbo Kit suitable for 1KZ-TE

$2,300.00

Garrett turbocharger upgrade for your 1KZ, features a billet wheel and greatly increased flow and response characteristics compared to a factory 1KZ CT12B turbocharger.

Garrett Turbo Kit suitable for 1KZ-TE, 1KZ-TE 39MM Garrett
This item: Garrett Turbo Kit suitable for 1KZ-TE
$2,300.00
$2,300.00
BRC Flywheel Clutch N80 1GD Hilux, BRC Flywheel Clutch Kit N70 1KD Hilux, BRC Flywheel Clutch Kit 4JJ1 RC, BRC 4JJ3 Single Mass Flywheel Clutch Kit,BRC RG Colorado Single Mass Flywheel, BRC MQ Triton Heavy Duty Clutch Flywheel, BRC Flywheel Clutch Kit 1KZ-TE
$1,450.00
Express Shipping

🇦🇺 Fast delivery Australia wide via Aus Post eParcel, FedEx, TNT Express

International Express

🌏 Worldwide delivery via DHL Express

Click & Collect

📦 Free in-store pickup availableDarra, 4076, QLD, Australia

Garrett Turbo Kit suitable for 1KZ-TE

It features a billet wheel and greatly increased flow and response characteristics compared to a factory 1KZ CT12B turbocharger.

Capable of up to 200hp, this turbocharger is the ultimate upgrade for your rig!

When used in conjunction with a Unichip ECU, this turbocharger will support over 200hp at 30PSI. We find them most comfortable at 200HP & 550NM @ 25PSI. Similar results can be expected when using a 12MM Mechanical fuel injection pump.

What’s included in the kit?

  • Garrett 44mm Turbocharger with 7.5PSI Wastegate, Orientated to suit the 1KZ Engine Configuration
  • Exhaust Flange & Gasket
  • Turbo Oil Feed & Drain Kit
  • Dayco Blankoff Caps (To blank off the factory water cooling to the original turbo)
  • CT12B to T2 Adapter
  • All studs & nuts required
  • All required turbo gaskets

 

When compared to the stock 1KZ-TE CT12B turbocharger, the Garrett 44MM turbocharger is in a class of its own. Efficient from 170hp and capable right up to 230hp, the Garrett turbo is a perfect match for your 1KZ engine.  The dyno graph displayed below was performed in house on our Mainline Chassis dyno. The vehicle was a KZN165 Toyota Hilux on 265/75r16 all terrains and was fitted with a 3″ exhaust system, front mount intercooler system, custom airbox and a Unichip, tuned in house with 5 Map select.

F.A.Q

Q. Is this a direct bolt on?

A. No. Some fabrication is required – You will have to make a custom dump pipe into your 3″ system. We supply the new flange with the turbo to do so. You will also need an intake pipe and intercooler hot-side pipe to suit.

Q. What PSI is the wastegate set to? 

A. They come set at 0.5 BAR of 7.5 PSI. You will need a boost controller to increase the boost pressure beyond this level.

Q. What if I want to upgrade my turbo, but don’t want to run 200HP, do you have another option for me?

A. Yes, we offer 2 turbos in various size for the 1KZ application. This is the larger option, we also offer a 150-180HP turbo as well which we find is a very popular choice for those looking to do touring and towing.

Additional information

Weight10.0 kg
Dimensions30.0 × 30.0 × 30.0 cm
Variant

44MM Turbo (200hp+), 39MM Turbo (170hp)

Brand

HDAutomotive