Right Outer Tie Rod End suitable for Nissan Navara NP300 D23

Right Outer Tie Rod End suitable for Nissan Navara NP300 D23

TE10031 right outer tie rod end (driver side) suitable for the Nissan Navara NP300 D23 from 2015, diesel and petrol. The NP300 uses a handed tie rod end, so order the side you need. Sealed ball joint with the boot fitted.

A clunk over bumps through the wheel, or a steering wheel off centre after a pothole, is usually an outer tie rod end. Grab the wheel at 9 and 3 and rock it. Play means it is done. Change them in pairs, count the turns off the old one so the toe comes back close, then get an alignment. We sell the left side on its own and the pair.

🚗 Suitable for:

• Nissan Navara NP300 D23 2.3 litre YS23DDTT twin turbo diesel 4WD, 05/2015 on (RX, SL, ST, ST-X, N-Trek, Pro-4X)
• Nissan Navara NP300 D23 2.3 litre YS23DDT single turbo diesel 4WD, 2015 on
• Nissan Navara NP300 D23 2.5 litre QR25DE petrol 4WD, 2015 on

📦 What’s Included:

• 1x TE10031 right outer tie rod end
• Castle nut and split pin

🔧 Fitment Details:

• Right side (driver side). The sides are different on the NP300
• One per side, two per vehicle. See our pair listing
• Wheel alignment after fitting

⚙️ Why Choose This Part:

• Sealed ball joint with the boot fitted
• Made to the original taper and thread

📦 Dispatch Information:

• Contact us for current stock and lead times.

❓ FAQs:

Q: Are left and right the same?
A: No. The NP300 tie rod ends are handed. Order the side you need or take the pair.

Q: Can I fit it without an alignment?
A: You can get it close by counting turns, but book an alignment.

Q: Not sure it suits your Navara?
A: Send us your VIN and we’ll check it before you order.