Proudly fitted to your favourite vehicles. As seen on,

Turbocharger Hotside Kit suitable for 1FZ-FE

HD Auto 1FZ-FE Hotside Kit, Supplied with our  J-Pipe manifold and Internally gated Pulsar Next GEN turbocharger – This kit includes a range of essential components for turbocharging your 1FZ

What’s Included:

• Genuine Toyota MLS Exhaust Manifold Gasket
• Genuine Toyota Exhaust Manifold Sealing Rings
• Turbocharger Oil Drain with Steel and Aluminum AN10 Weld-On Fitting
• New Lower Exhaust Manifold Studs & Nuts
• PULSAR Next GEN GTX3582 Internally Waste-gated Turbocharger with 5PSI Wastegate
• Stainless Steel 5 Bolt to 3″ V-Band Dump Pipe with Clamp and Flange
• Australian Made Stainless Turbocharger Oil and Water Feed Lines
• 1/8 T-Piece for Factory Oil Sender and Oil Feed
• HD J-Pipe Style Turbocharger Manifold (Retains Factory Headers)
• T3 Turbocharger Inlet Gasket
• All Required Hose Clamps
• All Fitting Hardware
• J-Pipe Fitting Guide
• Raceworks Extreme Duty Turbo Beanie RWM-046

Additional Items You May Need:

Turbocharging your 1FZ petrol engine correctly requires additional components such as a Fuel system upgrade, Aftermarket ECU, Intercooler, Ignition upgrade Clutches, and more.
Contact our sales team for any help needed choosing the right components

We have a helpful guide listed below:
https://hdautomotive.com.au/2024/01/17/definitive-guide-to-1fz-fe-turbo/

Check out our premium turbo kit here:
https://hdautomotive.com.au/product/1fz-fe-turbo-kit/

Turbocharger Information:

• New Aerodynamic 10 Blade Billet Compressor Wheel for increased airflow
• New Aerodynamic 9 Blade Turbine Wheel for reduced weight and higher flowability
• Genuine dual ceramic ball bearing system for durability
• Larger 0.72A/R compressor cover with Anti-Surge 4″ inlet
• Billet actuator with black anodized coating

📦 Dispatch information 

Turbo kits are built to order, 2-4 weeks lead time on dispatch

Manifold Information:

• Australian-designed and hand-crafted in Brisbane, QLD
• Fully TIG welded for durability
• Simple, compact and reliable design

Frequently Asked Questions (FAQs):

• Q: What PSI wastegate does it run?
  • A: It runs a 5 PSI wastegate. To increase boost pressure, a Boost Controller is required.
• Q: Do I need to run water lines to the turbo?
  • A: Yes, the turbochargers are water-cooled and must have the water lines connected to maintain warranty and prolong the turbocharger’s service life.
• Q: My vehicle has aftermarket extractors. Can I fit this kit?
  • A: The HD J-pipe is designed to bolt to the factory exhaust manifold/headers on a 1FZ-FE. You must use the factory headers or source them if you do not have them.

Please note that occasionally, there may be backorders of this product, with delays of up to 2 weeks. If you have concerns or deadlines, please contact us to confirm stock availability before placing your order.